Read Blooming Crochet Hats Online
Authors: Shauna-Lee Graham
Blooming Crochet Hats (10 page)
To fit approx. 0–3 months: 12"–13
1
⁄
2
" (30.5cm–34.3cm) circumference
To fit approx. 3–6 months: 14"–15" (35.6cm–38.1cm) circumference
To fit approx. 6–12 months: 15"–16
1
⁄
2
" (38.1cm–41.9cm) circumference
To fit approx. 1–3 years: 16
1
⁄
2
"–18" (41.9cm–45.7cm) circumference
To fit approx. 4–8 years: 18
1
⁄
2
"–20" (47cm–50.8cm) circumference
To fit approx. 9 years–adult: 20
1
⁄
2
"–22" (52.1cm–55.9cm) circumference
15 sts = 4" (10.2m);
7 rows dc = 4" (10.2cm)
ch(s)
= chain(s)
st(s)
= stitch(s)
sl st
= slip stitch
sp(s)
= space(s)
beg
= beginning
rep
= repeat
rnd(s)
= round(s)
sc
= single crochet
hdc
= half double crochet
dc
= double crochet
*
= repeat instructions following the asterisk as directed.
Ch 4; join with sl st in 1st ch to form ring.
Rnd 1:
Ch 3 (counts as dc now and throughout), work 11 dc in ring; join with sl st in 3rd ch of beg ch-3. (12 dc)
Rnd 2:
Ch 3, dc in same st as joining, * 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (24 dc)
Rnd 3:
Ch 3, 2 dc in next 2 dc, * dc in next dc, 2 dc in next 2 dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (40 dc)
Rnds 4–9:
Ch 3, dc in next st and in each st around; join with sl st in 3rd ch of beg ch-3. (40 dc)
Rnd 10:
Ch 2, hdc in next st and in each st around; join with sl st in 2nd ch of beg ch-2. (40 hdc)
Snug Rnd (this round prevents the brim of the hat from stretching):
Ch 1, sc in same st as joining, sl st in next 2 hdc, * sc in next hdc, sl st in next 2 hdc, rep from * around to last st, sc in last st; join with sl st in beg sc. (40 sts)
Fasten off. Weave in ends.
For instructions on button placement and creating the interchangeable band, see the end of the project.
To add the Newsboy Brim, see the end of the chapter.
Ch 4; join with sl st in 1st ch to form ring.
Rnd 1:
Ch 3 (counts as dc now and throughout), work 11 dc in ring; join with sl st in 3rd ch of beg ch-3. (12 dc)
Rnd 2:
Ch 3, dc in same st as joining, * 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (24 dc)
Rnd 3:
Ch 3, 2 dc in next dc, * dc in next dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (36 dc)
Rnd 4:
Ch 3, dc in next 3 dc, 2 dc in next dc, * dc in next 4 dc, 2 dc in next dc, rep from * around to last st, dc in last st; join with sl st in 3rd ch of beg ch-3. (43 dc)
Rnds 5–10:
Ch 3, dc in next st and in each st around; join with sl st in 3rd ch of beg ch-3. (43 dc)
Rnd 11:
Ch 2, hdc in next st and in each st around; join with sl st in 2nd ch of beg ch-2. (43 hdc)
Snug Rnd (this round prevents the brim of the hat from stretching):
Ch 1, sc in same st as joining, sl st in next 2 hdc, * sc in next hdc, sl st in next 2 hdc, rep from * around to last st, sc in last st; join with sl st in beg sc. (43 sts)
Fasten off. Weave in ends.
For instructions on button placement and creating the interchangeable band, see the end of the project.
To add the Newsboy Brim, see the end of the chapter.
Ch 4; join with sl st in 1st ch to form ring.
Rnd 1:
Ch 3 (counts as dc now and throughout), work 11 dc in ring; join with sl st in 3rd ch of beg ch-3. (12 dc)
Rnd 2:
Ch 3, dc in same st as joining, * 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (24 dc)
Rnd 3:
Ch 3, 2 dc in next dc, * dc in next dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (36 dc)
Rnd 4:
Ch 3, dc in next dc, 2 dc in next dc, * dc in next 2 dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (48 dc)
Rnds 5–11:
Ch 3, dc in next st and in each st around; join with sl st in 3rd ch of beg ch-3. (48 dc)
Rnd 12:
Ch 2, hdc in next st and in each st around; join with sl st in 2nd ch of beg ch-2. (48 hdc)
Snug Rnd (this round prevents the brim of the hat from stretching):
Ch 1, sc in same st as joining, sl st in next 2 hdc, * sc in next hdc, sl st in next 2 hdc, rep from * around; join with sl st in beg sc. (48 sts)
Fasten off. Weave in ends.
For instructions on button placement and creating the interchangeable band, see the end of the project.
To add the Newsboy Brim, see the end of the chapter.
Ch 4; join with sl st in 1st ch to form ring.
Rnd 1:
Ch 3 (counts as dc now and throughout), work 11 dc in ring; join with sl st in 3rd ch of beg ch-3. (12 dc)
Rnd 2:
Ch 3, dc in same st as joining, * 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (24 dc)
Rnd 3:
Ch 3, 2 dc in next dc, * dc in next dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (36 dc)
Rnd 4:
Ch 3, dc in next dc, 2 dc in next dc, * dc in next 2 dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (48 dc)
Rnd 5:
Ch 3, dc in next 7 sts, 2 dc in next dc, * dc in next 8 dc, 2 dc in next dc, rep from * around to last 3 sts, dc in last 3 sts; join with sl st in 3rd ch of beg ch-3. (53 dc)
Rnds 6–12:
Ch 3, dc in next st and in each st around; join with sl st in 3rd ch of beg ch-3. (53 dc)
Rnd 13:
Ch 2, hdc in next st and in each st around; join with sl st in 2nd ch of beg ch-2. (53 hdc)
Snug Rnd (this round prevents the brim of the hat from stretching):
Ch 1, sc in same st as joining, sl st in next 2 hdc, * sc in next hdc, sl st in next 2 hdc, rep from * around to last 2 sts, sc in next st, sl st in last st; join with sl st in beg sc. (53 sts)
Fasten off. Weave in ends.
For instructions on button placement and creating the interchangeable band, see the end of the project.
To add the Newsboy Brim, see the end of the chapter.
Ch 4; join with sl st in 1st ch to form ring.
Rnd 1:
Ch 3 (counts as dc now and throughout), work 11 dc in ring; join with sl st in 3rd ch of beg ch-3. (12 dc)
Rnd 2:
Ch 3, dc in same st as joining, * 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (24 dc)
Rnd 3:
Ch 3, 2 dc in next dc, * dc in next dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (36 dc)
Rnd 4:
Ch 3, dc in next dc, 2 dc in next dc, * dc in next 2 dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (48 dc)
Rnd 5:
Ch 3, dc in next 5 dc, 2 dc in next dc, * dc in next 6 dc, 2 dc in next dc, rep from * around to last 6 sts, dc in next 5 sts, 2 dc in last st; join with sl st in 3rd ch of beg ch-3. (55 dc)
Rnds 6–13:
Ch 3, dc in next st and in each st around; join with sl st in 3rd ch of beg ch-3. (55 dc)
Rnd 14:
Ch 2, hdc in next st and in each st around, join with sl st in 2nd ch of beg ch-2. (55 hdc)
Snug Rnd (this round prevents the brim of the hat from stretching):
Ch 1, sc in same st as joining, sl st in next 2 hdc, * sc in next hdc, sl st in next 2 hdc, rep from * around to last st, sc in last st; join with sl st in beg sc. (55 st)
Fasten off. Weave in ends.
For instructions on button placement and creating the interchangeable band, see the end of the project.
To add the Newsboy Brim, see the end of the chapter.
Ch 4; join with sl st in 1st ch to form ring.
Rnd 1:
Ch 3 (counts as dc now and throughout), work 11 dc in ring; join with sl st in 3rd ch of beg ch-3. (12 dc)
Rnd 2:
Ch 3, dc in same st as joining, * 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (24 dc)
Rnd 3:
Ch 3, 2 dc in next dc, * dc in next dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (36 dc)
Rnd 4:
Ch 3, dc in next dc, 2 dc in next dc, * dc in next 2 dc, 2 dc in next dc, rep from * around; join with sl st in 3rd ch of beg ch-3. (48 dc)
Rnd 5:
Ch 3, dc in next 3 dc, 2 dc in next dc, * dc in next 4 dc, 2 dc in next dc, rep from * around to last 3 sts, dc in next 2 sts, 2 dc in last st; join with sl st in 3rd ch of beg ch-3. (58 dc)
Rnds 6–14:
Ch 3, dc in next st and in each st around; join with sl st in 3rd ch of beg ch-3. (58 dc)
Rnd 15:
Ch 2, hdc in next st and in each st around; join with sl st in 2nd ch of beg ch-2. (58 hdc)
Snug Rnd (this round prevents the brim of hat from stretching):
Ch 1, sc in same st as joining, sl st in next 2 hdc, * sc in next hdc, sl st in next 2 hdc, rep from * around to last st, sc in last st; join with sl st in beg sc. (58 sts)
Fasten off. Weave in ends.
For instructions on button placement and creating the interchangeable band, see the end of the project.
To add the Newsboy Brim, see the end of the chapter.
Once the Newsboy Brim has been added to the hat, sew one button onto the 2nd dc rnd up from each corner of the Newsboy Brim.
Button the interchangeable band onto the buttons using the 3 hdc holes on each side of band.
Note:
If the band is for the 0–3 month hat size, you may have to button the band through one of the end dc to make the band fit snugly.
Sew a big, chunky wooden button on this hat or add an interchangeable motif to change the look for a boy or a girl. Add some color with stripes or make the hat without the brim for a simple, stylish beanie. (see
the Stitches & Techniques section
for information about color changes.)
With I hook and yarn color of your choice, ch 22.
Row 1:
Dc in 4th ch from hook and in each ch to end. (20 dc)
Rnd 2:
Do not turn; ch 2, work 3 hdc inside the ending dc sp, 2 hdc in next st, hdc in next 18 sts, 2 hdc in next st, work 3 hdc inside the ending dc sp, 2 hdc in next dc, hdc in next 18 dc, then hdc in the ch-st between hdc just made and the beg ch 2, sl st in 2nd ch of beg ch-2. (50 hdc)
Fasten off. Weave in ends.
I can see it now: An adorable little flower girl walking down the aisle wearing this precious headband with a flower motif made to match the bridesmaids’ dresses. It’s breathtaking. These super-quick headbands make perfect last-minute gifts. They are adjustable for a perfect fit and can be made in any color under the rainbow. Make them for all your family and friends, from newborns to adults.
For Twisted Headband: Light sport weight yarn in the color of your choice
- 0–3 mos. (36yd/32.9m)
- 3–6 mos. (40yd/36.6m)
- 6–12 mos. (45yd/41.1m)
- 1–3 yrs. (56yd/51.2m)
- 4–8 yrs. (62yd/56.7m)
- 9 yrs.–adult (65yd/59.4m)
Size I (5.5mm) crochet hook
1
1
⁄
8
" (2.8cm) button
Tapestry needle
Scissors