Stories of Your Life (21 page)

The nascent science of thermodynamics, which established the interconvertibility of heat and work, had recently explained how automata gained their motive power by absorbing heat from their surroundings. Using this improved understanding of heat, a
Namenmeister
in Berlin had developed a new class of amulet that caused a body to absorb heat from one location and release it in another. Refrigeration employing such amulets was simpler and more efficient than that based on the evaporation of a volatile fluid, and had immense commercial application. Amulets were likewise facilitating the improvement of automata: an Edinburgh nomenclator's research into the amulets that prevented objects from becoming lost had led him to patent a household automaton able to return objects to their proper places.

Upon graduation, Stratton took up residence in London and secured a position as a nomenclator at Coade Manufactory, one of the leading makers of automata in England.

Stratton's most recent automaton, cast from plaster of Paris, followed a few paces behind him as he entered the factory building. It was an immense brick structure with skylights for its roof; half of the building was devoted to casting metal, the other half to ceramics. In either section, a meandering path connected the various rooms, each one housing the next step in transforming raw materials into finished automata. Stratton and his automaton entered the ceramics portion.

They walked past a row of low vats in which the clay was mixed. Different vats contained different grades of clay, ranging from common red clay to fine white kaolin, resembling enormous mugs abrim with liquid chocolate or heavy cream; only the strong mineral smell broke the illusion. The paddles stirring the clay were connected by gears to a drive shaft, mounted just beneath the skylights, that ran the length of the room. At the end of the room stood an automatous engine: a cast-iron giant that cranked the drive wheel tirelessly. Walking past, Stratton could detect a faint coolness in the air as the engine drew heat from its surroundings.

The next room held the molds for casting. Chalky white shells bearing the inverted contours of various automata were stacked along the walls. In the central portion of the room, apron-clad journeymen sculptors worked singly and in pairs, tending the cocoons from which automata were hatched.

The sculptor nearest him was assembling the mold for a putter, a broad-headed quadruped employed in the mines for pushing trolleys of ore. The young man looked up from his work. “Were you looking for someone, sir?” he asked.

"I'm to meet Master Willoughby here,” replied Stratton.

"Pardon, I didn't realize. I'm sure he'll be here shortly.” The journeyman returned to his task. Harold Willoughby was a Master Sculptor First-Degree; Stratton was consulting him on the design of a reusable mold for casting his automaton. While he waited, Stratton strolled idly amongst the molds. His automaton stood motionless, ready for its next command.

Willoughby entered from the door to the metalworks, his face flushed from the heat of the foundry. “My apologies for being late, Mr. Stratton,” he said. “We've been working toward a large bronze for some weeks now, and today was the pour. You don't want to leave the lads alone at a time like that."

"I understand completely,” replied Stratton.

Wasting no time, Willoughby strode over to the new automaton. “Is this what you've had Moore doing all these months?” Moore was the journeyman assisting Stratton on his project.

Stratton nodded. “The boy does good work.” Following Stratton's requests, Moore had fashioned countless bodies, all variations on a single basic theme, by applying modeling clay to an armature, and then used them to create plaster casts on which Stratton could test his names.

Willoughby inspected the body. “Some nice detail; looks straightforward enough—hold on now.” He pointed to the automaton's hands: rather than the traditional paddle or mitten design, with fingers suggested by grooves in the surface, these were fully formed, each one having a thumb and four distinct and separate fingers. “You don't mean to tell me those are functional?"

"That's correct."

Willoughby's skepticism was plain. “Show me."

Stratton addressed the automaton. “Flex your fingers.” The automaton extended both hands, flexed and straightened each pair of fingers in turn, and then returned its arms to its sides.

"I congratulate you, Mr. Stratton,” said the sculptor. He squatted to examine the automaton's fingers more closely. “The fingers need to be bent at each joint for the name to take?"

"That's right. Can you design a piece mold for such a form?"

Willoughby clicked his tongue several times. “That'll be a tricky bit of business,” he said. “We might have to use a waste mold for each casting. Even with a piece mold, these'd be very expensive for ceramic."

"I think they will be worth the expense. Permit me to demonstrate.” Stratton addressed the automaton. “Cast a body; use that mold over there."

The automaton trudged over to a nearby wall and picked up the pieces of the mold Stratton had indicated: it was the mold for a small porcelain messenger. Several journeymen stopped what they were doing to watch the automaton carry the pieces over to a work area. There it fitted the various sections together and bound them tightly with twine. The sculptors’ wonderment was apparent as they watched the automaton's fingers work, looping and threading the loose ends of the twine into a knot. Then the automaton stood the assembled mold upright and headed off to get a pitcher of clay slip.

"That's enough,” said Willoughby. The automaton stopped its work and resumed its original standing posture. Examining the mold, Willoughby asked, “Did you train it yourself?"

"I did. I hope to have Moore train it in metal casting."

"Do you have names that can learn other tasks?"

"Not as yet. However, there's every reason to believe that an entire class of similar names exists, one for every sort of skill needing manual dexterity."

"Indeed?” Willoughby noticed the other sculptors watching, and called out, “If you've nothing to do, there's plenty I can assign to you.” The journeymen promptly resumed their work, and Willoughby turned back to Stratton. “Let us go to your office to speak about this further."

"Very well.” Stratton had the automaton follow the two of them back to the frontmost of the complex of connected buildings that was Coade Manufactory. They first entered Stratton's studio, which was situated behind his office proper. Once inside, Stratton addressed the sculptor. “Do you have an objection to my automaton?"

Willoughby looked over a pair of clay hands mounted on a worktable. On the wall behind the table were pinned a series of schematic drawings showing hands in a variety of positions. “You've done an admirable job of emulating the human hand. I am concerned, however, that the first skill in which you trained your new automaton is sculpture."

"If you're worried that I am trying to replace sculptors, you needn't be. That is absolutely not my goal."

"I'm relieved to hear it,” said Willoughby. “Why did you choose sculpture, then?"

"It is the first step of a rather indirect path. My ultimate goal is to allow automatous engines to be manufactured inexpensively enough so that most families could purchase one."

Willoughby's confusion was apparent. “How, pray tell, would a family make use of an engine?"

"To drive a powered loom, for example."

"What are you going on about?"

"Have you ever seen children who are employed at a textile mill? They are worked to exhaustion; their lungs are clogged with cotton dust; they are so sickly that you can hardly conceive of their reaching adulthood. Cheap cloth is bought at the price of our workers’ health; weavers were far better off when textile production was a cottage industry."

"Powered looms were what took weavers out of cottages. How could they put them back in?"

Stratton had not spoken of this before, and welcomed the opportunity to explain. “The cost of automatous engines has always been high, and so we have mills in which scores of looms are driven by an immense coal-heated Goliath. But an automaton like mine could cast engines very cheaply. If a small automatous engine, suitable for driving a few machines, becomes affordable to a weaver and his family, then they can produce cloth from their home as they did once before. People could earn a decent income without being subjected to the conditions of the factory."

"You forget the cost of the loom itself,” said Willoughby gently, as if humoring him. “Powered looms are considerably more expensive than the hand looms of old."

"My automata could also assist in the production of cast-iron parts, which would reduce the price of powered looms and other machines. This is no panacea, I know, but I am nonetheless convinced that inexpensive engines offer the chance of a better life for the individual craftsman."

"Your desire for reform does you credit. Let me suggest, however, that there are simpler cures for the social ills you cite: a reduction in working hours, or the improvement of conditions. You do not need to disrupt our entire system of manufacturing."

"I think what I propose is more accurately described as a restoration than a disruption."

Now Willoughby became exasperated. “This talk of returning to a family economy is all well and good, but what would happen to sculptors? Your intentions notwithstanding, these automata of yours would put sculptors out of work. These are men who have undergone years of apprenticeship and training. How would they feed their families?"

Stratton was unprepared for the sharpness in his tone. “You overestimate my skills as a nomenclator,” he said, trying to make light. The sculptor remained dour. He continued. “The learning capabilities of these automata are extremely limited. They can manipulate molds, but they could never design them; the real craft of sculpture can be performed only by sculptors. Before our meeting, you had just finished directing several journeymen in the pouring of a large bronze; automata could never work together in such a coordinated fashion. They will perform only rote tasks."

"What kind of sculptors would we produce if they spend their apprenticeship watching automata do their jobs for them? I will not have a venerable profession reduced to a performance by marionettes."

"That is not what would happen,” said Stratton, becoming exasperated himself now. “But examine what you yourself are saying: the status that you wish your profession to retain is precisely that which weavers have been made to forfeit. I believe these automata can help restore dignity to other professions, and without great cost to yours."

Willoughby seemed not to hear him. “The very notion that automata would make automata! Not only is the suggestion insulting, it seems ripe for calamity. What of that ballad, the one where the broomsticks carry water buckets and run amuck?"

"You mean ‘Der Zauberlehrling'?” said Stratton. “The comparison is absurd. These automata are so far removed from being in a position to reproduce themselves without human participation that I scarcely know where to begin listing the objections. A dancing bear would sooner perform in the London Ballet."

"If you'd care to develop an automaton that can dance the ballet, I would fully support such an enterprise. However, you cannot continue with these dexterous automata."

"Pardon me, sir, but I am not bound by your decisions."

"You'll find it difficult to work without sculptors’ cooperation. I shall recall Moore and forbid all the other journeymen from assisting you in any way with this project."

Stratton was momentarily taken aback. “Your reaction is completely unwarranted."

"I think it entirely appropriate."

"In that case, I will work with sculptors at another manufactory."

Willoughby frowned. “I will speak with the head of the Brotherhood of Sculptors, and recommend that he forbid all of our members from casting your automata."

Stratton could feel his blood rising. “I will not be bullied,” he said. “Do what you will, but you cannot prevent me from pursuing this."

"I think our discussion is at an end.” Willoughby strode to the door. “Good day to you, Mr. Stratton."

"Good day to you,” replied Stratton heatedly.

It was the following day, and Stratton was taking his midday stroll through the district of Lambeth, where Coade Manufactory was located. After a few blocks he stopped at a local market; sometimes among the baskets of writhing eels and blankets spread with cheap watchs were automatous dolls, and Stratton retained his boyhood fondness for seeing the latest designs. Today he noticed a new pair of boxing dolls, painted to look like an explorer and a savage. As he looked them over awhile, he could hear nostrum peddlers competing for the attention of a passerby with a runny nose.

"I see your health amulet failed you, sir,” said one man whose table was arrayed with small square tins. “Your remedy lies in the curative powers of magnetism, concentrated in Doctor Sedgewick's Polarising Tablets!"

"Nonsense!” retorted an old woman. “What you need is tincture of mandrake, tried and true!” She held out a vial of clear liquid. “The dog wasn't cold yet when this extract was prepared! There's nothing more potent."

Seeing no other new dolls, Stratton left the market and walked on, his thoughts returning to what Willoughby had said yesterday. Without the cooperation of the sculptors’ trade union, he'd have to resort to hiring independent sculptors. He hadn't worked with such individuals before, and some investigation would be required: ostensibly they cast bodies only for use with public-domain names, but for certain individuals these activities disguised patent infringement and piracy, and any association with them could permanently blacken his reputation.

"Mr. Stratton."

Stratton looked up. A small, wiry man, plainly dressed, stood before him. “Yes; do I know you, sir?"

"No, sir. My name is Davies. I'm in the employ of Lord Fieldhurst.” He handed Stratton a card bearing the Fieldhurst crest.

Edward Maitland, third earl of Fieldhurst and a noted zoologist and comparative anatomist, was president of the Royal Society. Stratton had heard him speak during sessions of the Royal Society, but they had never been introduced. “What can I do for you?"